Phoenix Model Super Cub PA-18 30cc Gas EP ARF 107"
Key Features Construction: Laser cut balsa and light plywood Wing: 2 piece w/all wood construction, ailerons pre-installed, aluminum wing joiner Aileron and Flap Control: Dual servo Covering: Hangar 9 UltraCote Radio Compartment: Plywood reinforced Cowl Pre-painted Fiberglass Canopy: Clear with painted-on frame lines Landing Gear: Scale shock absorbing steel main gear,aluminum tail gear Wheels: Two 4.25" (108mm) foam main, one 1" (25mm) tail wheel Fuel Tank: Approximately 16oz (473cc) Motor Mount: Three plywood plates with aluminum standoffs Engine Mount: Plywood with aluminum standoffs icon-boxIn The Box ARF Super Cub 30cc Airplane with Landing Gear Wheels Fuel Tank
Quantity
-
Detail
Features
- Pre-covered in high-quality film
- Plug in wings for easy transport and setup
- Strong, light construction
- Superb flight characteristics
- Accurate scale details
- Full hardware included
Overview
The Piper Cub was produced in the early thirties and forties and quickly became one of the most beloved light aircraft of all time. Its successor, the Super Cub, was produced from 1949 to 1994 and continued the tradition of maneuverability and ease of flight started by the original. This model is 3D engineered to produce precision parts that match perfectly with the full scale version. It features removable wings for easy transportation, and is pre-cut and pre-sheeted for quicker construction.
Video Overview
GP/EP compatibility
Designed for GP/EP compatibility
Cockpit
Full cockpit and instrument panel
Quality Construction
Top quality balsa and light plywood construction
All Included
Includes everything you see here!
Specifications
- Wingspan: 107" (2720mm)
- Weight: 19 - 20lb (9 - 9.5kg)
- Length: 68.6" (174.2m)
- Wing Area: 1705 sq in (110 sq dm)
- Wing Loading: 26.54 oz sq/in (81 sq/dm)
- Wing Type: NACA Airfoil
- Servo Mount: 0.83 x 1.6" (21 x 42mm)
- Center of Gravity: 4.3" (109mm) Back from the wing's leading edge measured at the fuselage
- Control Throws- High Rate Low Rate
- Elevator: 0.39" (10mm) 12% expo 0.47" (12mm) 12% expo
- Rudder: 1.2" (30mm) 15% expo 1.6" (40mm) 15% expo
- Ailerons: 0.39" (10mm) 10% expo 0.47" (12mm) 10% expo
- Control Throw Flap: mid, (15mm) down, landing 20mm down
Customer Reviews
No comments
