HOBBYWING QuicRun 1080 G2 Combo ESC with 540 Motor
-
Detail
Features
- Fully Water-proof and dust-proof, suitable for all-weather races.
- Four operating modes available (Real Car Operating / FWD with Brake / FWD and REV with Brake / FWD and REV).
- Real-Time Adjustment of Drag Braking Force.
- PWM Frequency: 1K/2K/4K/8K/16K Adjustable.
- Drag brake rate in 9 levels (adjustable).
- Great current endurance capability.
- Automatic throttle range calibration, easy to use.
- Throttle signal loss protection, and much more.
- Small in size, with a built-in capacitor module.
- In the first "real car mode" The direction of the motor is switchable in real time by using the idle channel on the remote control.
- 15 programmable parameter items.
- Freewheeling (DEO) capability.
- Aluminum case for great heat dissipation.
- Great built-in BEC output capacity switchable 6V/ 7.4/ 8.4V.
- Low voltage cut-off protection for battery.
- Risk-Free manufacturer's limited warranty available through Authorized Dealers in North America.
The First "Real Car Mode"
The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver). This new feature will provide the user with a unique experience unlike any other.
Four Running Modes Available
In addition to the “Real car running mode”, the other operating modes such as “Forward with brakes”, “Forward, reverse with brakes”, and “Forward and reverse” are also available.
Temperature Control Upgrade
The new design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs.
BEC Upgrade
The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market.
Real-Time Adjustment Of Drag Braking Force
Adjust the drag brake force in real time! With the Drag brake Force Signal connected to an open channel on the receiver, users can adjust the drag brake force on the fly without the need to connect the Programmer. (Requires open channel on receiver).
Multiple, Easy To Set Parameters
15 Programmable Items let drivers easily tune their vehicle with the LED Programming Box connected to the programming port.
IP67 Protection
IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces.
Specialized Carbon Brush For Extended Life
Developed specifically for these motors, the new brushes feature a custom blend to provide extremely long life, while providing great performance. These motors start to compare to brushless motors in terms of life span.
Adjustable Mechanical Timing Of The Motor
The mechanical timing of the motor can be adjusted by -20 — 20 °. This allows users to fine-tune the RPM and feel of motors. Timing adjustments also allow the motors to be used for CCW and CW applications.
Zero-Cogging Torque Design
The 555 motor adopts a 5-slot design, and the motor cogging effect is virtually eliminated. These new motors have a very small torque fluctuation and, bring a very linear response at all speeds for an improved overall drive feel.
PCB Anti-Interference Board
The motor is equipped with a dual PCB anti-interference board. These reduce the harmful spikes and noise from affecting your speed control.
Excellent Efficiency
With up to 69% maximum efficiency, the QuicRun brushed motors far exceed standard motors of the same specifications (555-11T). The maximum efficiency is up to 17% higher. These new motors run cooler (Lower temps) than similar motors under the same load.
Quality Materials
To ensure high tolerance to abuse and heavy-duty driving, a 200°C high-temperature resistant magnet, 180°C high-temperature resistant copper wire has been used. Combined with 0.35 mm (only 555) ultra-thin silicon steel sheet, and the Hobbywing custom carbon brush, these motors are built to handle the demands of today's driver.
Product Specifications
| Adjustable Timing | Yes |
| Amperage | 80A |
| BEC | Yes |
| BEC Voltage | 6V/7.4V/8.4V @ 4A (switch-mode) |
| Connector Type | XT-60 |
| Forward | Yes |
| Input Voltage | 2-3S LiPo or 5-9S NiMH |
| Low-Voltage Cutoff Programmable | Yes |
| Manufacturer # | 38020349 |
| Maximum Burst Current | 400A |
| Maximum Continuous Current | 80A |
| Motor Limit | Brushed Motors 540/550 Series |
| Motor Type | Brushed |
| Outer Diameter | 1.42" (36 mm) |
| Overload Protection | Yes |
| Product Height | 0.7244094" (18 mm) |
| Product Length | 1.464567" (37 mm) |
| Product Weight | 70.2g (2.48 oz) |
| Product Width | 1.255906" (32 mm) |
| Programmable | Yes |
| Reverse | Yes |
| RPM/Volt (Kv) | 14000 |
| Shaft Diameter | 0.125" (3 mm) |
| Shaft Length | 0.65" (17 mm) |
| Speed Control | Included |
| Turns | 30T |
| Water-Resistant | Yes |
| Wire Gauge | 14 AWG |
