HOBBYWING QuicRun WP 1080 Brushed G2 ESC
-
Detail
Features
- Fully Water-proof and dust-proof, suitable for all-weather races.
- Four operating modes available (Real Car Operating / FWD with Brake / FWD and REV with Brake / FWD and REV).
- Real-Time Adjustment of Drag Braking Force.
- PWM Frequency: 1K/2K/4K/8K/16K Adjustable.
- Drag brake rate in 9 levels (adjustable).
- Great current endurance capability.
- Automatic throttle range calibration, easy to use.
- Throttle signal loss protection, and much more.
- Small in size, with a built-in capacitor module.
- In the first "real car mode" The direction of the motor is switchable in real time by using the idle channel on the remote control.
- 15 programmable parameter items.
- Freewheeling (DEO) capability.
- Aluminum case for great heat dissipation.
- Great built-in BEC output capacity switchable 6V/ 7.4/ 8.4V.
- Low voltage cut-off protection for battery.
- Risk-Free manufacturer's limited warranty available through Authorized Dealers in North America.
The First "Real Car Mode"
The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver). This new feature will provide the user with a unique experience unlike any other.
Four Running Modes Available
In addition to the “Real car running mode”, the other operating modes such as “Forward with brakes”, “Forward, reverse with brakes”, and “Forward and reverse” are also available.
Temperature Control Upgrade
The new design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs.
BEC Upgrade
The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market.
Real-Time Adjustment Of Drag Braking Force
Adjust the drag brake force in real time! With the Drag brake Force Signal connected to an open channel on the receiver, users can adjust the drag brake force on the fly without the need to connect the Programmer. (Requires open channel on receiver).
Multiple, Easy To Set Parameters
15 Programmable Items let drivers easily tune their vehicle with the LED Programming Box connected to the programming port.
IP67 Protection
IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces.
Product Specifications
| Amperage | 80A |
| BEC | Yes |
| BEC Voltage | 6V/7.4V/8.4V @ 4A (switch-mode) |
| Connector Type | XT-60 |
| Forward | Yes |
| Input Voltage | 2-3S LiPo or 5-9S NiMH |
| Low-Voltage Cutoff Programmable | Yes |
| Manufacturer # | 30120202 |
| Maximum Burst Current | 400A |
| Maximum Continuous Current | 80A |
| Motor Limit | Brushed Motors 540/550 Series |
| Motor Type | Brushed |
| Overload Protection | Yes |
| Product Height | 0.7244094" (18 mm) |
| Product Length | 1.464567" (37 mm) |
| Product Weight | 70.2g (2.48 oz) |
| Product Width | 1.255906" (32 mm) |
| Programmable | Yes |
| Reverse | Yes |
| Speed Control | Included |
| Water-Resistant | Yes |
| Wire Gauge | 14 AWG |
