Kyosho 1/8 Inferno Neo3.0 VE 4X4 Off-Road 4S Brushless Buggy RTR
-
Detail
Features
- Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
- Full-time 4WD with low C of G 3-diff shaft drive.
- Big Bore oil shocks and 4-wheel independent double wishbone suspension.
- Full bearing specifications with 18 ball bearings on drive system and suspension.
- Features thick suspension arms with high torsional rigidity.
- Wide variety of optional parts is available to upgrade the chassis.
- Equipped with 1.0 module metal main gear, designed for hard running.
- Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
- Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.
Video Overview
Anodized Finish Aluminum
Shares the same stylish gun metallic anodized finish aluminum parts as Kyosho’s flagship “Inferno MP9”.
TORX8 Brushless Motor
KYOSHO SPEED HOUSE TORX8 brushless motor delivers powerful acceleration. 2-piece motor mount allows easy backlash adjustment and removal of motor.
BRAINZ8 ESC
KYOSHO SPEED HOUSE BRAINZ8 ESC with electric cooling fan features a 10-item program that allows precision adjustments such as brake, timing advance, cutoff voltage and heat protection.
Large Big Bore Shocks
Large Big Bore resin oil shocks produce excellent surface tracing. High-strength aluminum shock stays deliver full shock absorber performance.
Adjustable Alignment
Turnbuckle upper arms and steering tie rod can be adjusted to optimize alignment setting to running conditions.
KS5031-09MW Steering Servo
Included high-torque (KS5031-09MW) steering servo delivers nimble control feel. Features built-in high durability metal gears.
Lowered Chassis Height
Lowered chassis height in combination with optimal weight balance and big bore shocks realizes high stability running performance.
KC Cross Tires
Equipped with KC Cross Tires that are designed with a block pattern seen in motocross bikes. Wear-resistant, these tires deliver exceptional performance on any surface.
Printed Body
High visibility printed body is designed for airborne stability and control and is also pre-cut with decals applied.
Product Specifications
| Approximate Assembly Time | No assembly required |
| Ball Bearings | Full set, 18 total |
| Battery | Two 7.2V NiMH, or two 7.4V LiPo with T-plug connector |
| Body | Trimmed and painted with green color scheme, rear wing included |
| Brakes | Integral wirth ESC |
| Bushing Material | Metal |
| Charger | Sold Separately |
| Chassis | Aluminum |
| Completion Level | Ready-To-Run |
| Connector Type | Deans |
| Differential | Machined bevel gears |
| Drivetrain | 4WD |
| Gear Pitch | 1.0 Module |
| Internal Gear Ratio | 12.7:1 |
| Max Battery Dimensions | 3.3 x 1.4 x 0.71" (85 x 35 x 18mm) |
| Motor Size | 2000Kv |
| Motor Type | Brushless |
| Outer Diameter | 4.5" (115mm) |
| Power Type | Electric |
| Product Height | 7.4 in (189mm) |
| Product Length | 19.5 in (496mm) |
| Product Weight | 7.8lbs (3,550g) approximate |
| Product Width | 12.1 in (307mm) |
| Radio | Synchro KT-231P+ |
| Receiver | Included |
| Scale | 1/8 |
| Servos | High-speed, high-torque steering servo |
| Shock Type | Big bore oil-filled resin body |
| Suspension | 4-wheel Independent |
| Tire Tread | Block Pattern |
| Vehicle Type | Buggy |
| Water-Resistant | Yes |
| Wheel Type | 10-spoke plastic 1:8 scale buggy |
| Wheelbase | 12.7 - 12.9 in (323 - 328mm) |
