Home
/
HOBBYWING XeRun V10 G3 6.5T Modified Brushless Motor
HOBBYWING XeRun V10 G3 6.5T Modified Brushless Motor
DESIGN matters. It’s a motor specially designed for Extremely High-Level Racing. The RMP of G3 Stock motor is significantly improved, the KV & torque are improved by 16% and 4% respectively, compared with the V10 G2 Stock motor.
Quantity
-
Detail
Features
- Lightweight. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when compared with the previous generation G2 motors.
- The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
- The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee the stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
- The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
- The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
- The use of high-performance stator core, heat(200℃)-resistant wire, heat(200℃)-resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
- It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC
Product Specifications
| Adjustable Timing | Yes |
| Application | Modified class of 1/10 scale 4WD off-road racing |
| Bushing Or Bearing | Bearing |
| Input Voltage | 2S |
| Manufacturer # | 30401109 |
| Maximum Burst Current | 113A, 402W |
| Motor Design | Inrunner |
| Motor Type | Brushless |
| Number of Poles | 2 |
| Outer Diameter | 1.4" (36 mm) |
| Product Length | 2.01" (51 mm) |
| Product Weight | 5.78oz (164g) |
| Recommended Speed Control | Hobbywing XR10 PRO or XR10 Stock SPEC (1S & 2S) |
| Resistance | 0.0056ohms |
| RPM/Volt (Kv) | 5120Kv |
| Sensored | Yes |
| Shaft Diameter | 0.125" (3 mm) |
| Shaft Length | 0.52" (13 mm) |
| Turns | 6.5T |
Customer Reviews
No comments
